In this article, we will show you how to make AirPods louder by adjusting device settings, cleaning your AirPods, and using EQ options to boost your sound experience today!
AirPods have become a go-to choice for wireless earbuds due to their sleek design and exceptional sound quality. But let’s face it—sometimes the audio doesn’t reach the volume level you crave.
Whether you’re listening to your favorite tunes, catching up on podcasts, or watching videos, a boost in sound can make all the difference.
If you’re looking to make your AirPods louder, you’re in the right place. In this article, we’ll explore practical tips to improve the volume on your AirPods and enhance your listening experience.
How to Make AirPods Louder
1. Check the Volume on Your Device
The first and simplest step is to ensure the volume on your connected device (iPhone, iPad, MacBook, etc.) is turned up. It may sound obvious, but it’s easy to overlook. Sometimes, the issue lies in the device itself rather than the AirPods.
Tip: Use the physical volume buttons on your device to adjust the sound. Additionally, you can swipe up (iPhone) or use the volume control in the settings to fine-tune it.
2. Enable Sound Settings on iOS or macOS
Apple devices, like iPhones, iPads, and Macs, have built-in settings that can affect how loud your AirPods can get. Here are a few ways to fine-tune these settings:
Adjust the Volume Limit
On iOS devices, there’s a feature called the Volume Limit, which may restrict how loud your AirPods can go. If you’ve set it too low, it can limit your sound experience.
How to turn off the volume limit on iPhone or iPad:
-
Go to Settings > Music.
-
Tap on Volume Limit and slide the slider to the right to increase the maximum volume.
-
If it’s set to the lowest level, this could be why your AirPods sound quieter than usual.
Use the EQ Settings
The EQ (Equalizer) settings in your iPhone or iPad allow you to adjust the sound to suit your preferences, and sometimes this can make your AirPods sound louder.
To access the EQ settings:
-
Open Settings > Music.
-
Tap EQ and choose a preset like Late Night or Bass Booster to enhance the volume and overall sound quality.
3. Clean Your AirPods
Over time, earwax and debris can build up in your AirPods, affecting both sound quality and volume. If the speaker grills are clogged, the sound may not come through at its full potential.
How to clean your AirPods:
-
Gently wipe down the exterior with a soft, dry cloth.
-
Use a small, soft-bristled brush or a cotton swab to clean the speaker mesh.
-
Be careful not to push debris further into the mesh.
Tip: Always ensure that your AirPods are fully dry and free of moisture before using them.
4. Reset Your AirPods
If your AirPods have been acting up and you’ve tried everything else without success, performing a reset might help.
Here’s how to reset your AirPods:
-
Place your AirPods in their charging case.
-
Open the case lid and press the setup button on the back of the case until the status light flashes amber, then white.
-
Reconnect your AirPods to your device by following the on-screen prompts.
This can help clear any glitches that might be limiting the volume or sound performance.
5. Use Third-Party Apps
There are third-party apps available for both iOS and Android devices that can help boost the volume beyond the system’s limits. Apps like Boom or Volume Booster can offer an additional level of control, making your AirPods louder.
Be cautious when using third-party apps as they may distort the sound quality or put additional strain on your device’s audio hardware. Always use apps from reputable developers to ensure the best sound quality.
6. Update Your AirPods and Device Software
Apple frequently releases software updates for both AirPods and iOS or macOS, which may include bug fixes or improvements to audio performance.
To check for updates:
-
For AirPods: Ensure that your AirPods are connected to your device, and they will automatically update when new firmware is released.
-
For iPhone/iPad: Go to Settings > General > Software Update to check if any updates are available.
Keeping both your AirPods and device updated will ensure you’re getting the best possible sound experience.
7. Consider AirPods Pro or Max for Better Sound Quality
If you’ve tried everything and still find the volume lacking, it might be worth upgrading to AirPods Pro or AirPods Max. These premium options offer advanced noise cancellation, better sound quality, and the ability to adjust volume more precisely.
AirPods Pro offers the benefit of active noise cancellation, which can make even moderate volume levels sound clearer and more powerful. AirPods Max, the over-ear version, takes things even further, with superior audio performance and deeper bass.
Conclusion
With these tips, you should be able to boost the volume on your AirPods and enjoy your music, podcasts, and calls at the perfect sound level. Start with the basics—checking the volume on your device and adjusting your settings—and work your way through the steps to ensure you’re getting the most out of your AirPods.
If all else fails, consider upgrading to a higher-end model like the AirPods Pro or Max for even better sound quality and louder volume.
Share This Post:
