In this article, we will show you how to fix AirPods not working. Follow the steps to fix connectivity, charging, and audio issues. Get your AirPods back to normal in no time!

AirPods are a convenient and essential gadget for many of us, whether for listening to music, taking calls, or even engaging with voice assistants. But what happens when your AirPods stop working?

Whether you’re facing connectivity issues, sound problems, or the classic “AirPods not charging” situation, it can be frustrating. But don’t panic!

Here, we will walk you through the most common reasons why AirPods stop working and provide simple, easy-to-follow solutions to get them back to working smoothly.

See Also: 7 Ways to Make AirPods Louder

Common Reasons Why Your AirPods Aren’t Working

1. Battery Draining or Charging Issues

One of the most common reasons why your AirPods might not work is due to battery issues. If your AirPods aren’t charging properly or have run out of battery, they won’t function at all.

What to do:

• • Check if the charging case is properly charged. If the case is low on power, plug it into a charger.

  • Ensure that the charging pins inside the case are clean and free of debris.

  • Try resetting your AirPods and placing them back into the case for a full recharge.

2. Bluetooth Connectivity Problems

AirPods rely on Bluetooth to connect with your devices. If there’s an issue with the Bluetooth connection, your AirPods won’t work properly.

What to do:

• • Turn Bluetooth off and on again on your device.

  • Forget the AirPods on your device and then reconnect them. To do this, go to Bluetooth settings, find your AirPods, click the “i” icon, and select “Forget This Device.”

  • Try pairing the AirPods with a different device to check if the issue is device-specific.

See Also: 6 Steps to Find My AirPods

3. Software or Firmware Glitches

Sometimes, AirPods can stop working due to software bugs or outdated firmware. Your iPhone or other device could have a software issue affecting connectivity or audio output.

What to do:

• • Ensure that your iPhone or other device has the latest software update installed.

  • Update your AirPods firmware, which is automatically done when the AirPods are in their charging case and connected to a device with an internet connection.

  • Reset your AirPods to factory settings by holding the setup button on the back of the case for about 15 seconds until the status light flashes amber, then white.

4. Dirty or Blocked AirPods

Dirt, wax, or debris can get into the small speakers of your AirPods , causing poor sound quality or no sound at all.

What to do:

• • Gently clean your AirPods with a soft, dry, lint-free cloth. Be careful around the speaker mesh and microphone areas.

  • Use a toothpick or a soft brush to remove any earwax or debris from the speaker grille.

See Also: 5 Steps to Reset AirPods

5. Audio Issues or One AirPod Not Working

If you’re experiencing sound problems, such as one AirPod not producing sound or both AirPods having low volume, it could be due to a connection issue or even a malfunctioning speaker.

What to do:

• • Check the balance of your audio settings. Go to your device’s “Accessibility” settings to ensure that audio isn’t balanced more to one ear.

  • Try using a different app or playing different content to rule out app-specific issues.

  • If only one AirPod isn’t working, place it back in the case, close it, and try again.

6. AirPods Not Syncing with Your Device

Sometimes AirPods may not sync with your device, and you might have trouble using them.

What to do:

• • Ensure that your device’s Bluetooth is turned on and discoverable.

  • Try resetting your AirPods by holding the setup button on the case until the status light flashes amber and then white.

  • Reconnect your AirPods through the Bluetooth settings.

Additional Solutions

• Check the Charging Case: The case itself could be the issue. Try charging your AirPods in a different charging case (if possible) to rule out the case being faulty.

• Reset the Bluetooth Connection: Sometimes, Bluetooth connections on your device can get bogged down. Resetting your device’s network settings may help. On iPhone, go to “Settings” > “General” > “Reset” > “Reset Network Settings.”

• Check for Interference: Bluetooth devices, including AirPods , can sometimes face interference from other nearby devices. Ensure that you are not in an area with too many Bluetooth devices.

See Also: 5 Steps to redeem Apple Music after buying AirPods

When to Contact Apple Support

If you’ve tried all the troubleshooting steps and your AirPods still aren’t working, it might be time to contact Apple Support. There could be a hardware issue, such as a faulty battery or malfunctioning internal components.

What to do:

• Visit the Apple Support website for assistance or to book an appointment at your nearest Apple Store.

• If your AirPods are still under warranty, you may be eligible for a replacement or repair.

Conclusion

AirPods are amazing, but like all tech, they can sometimes encounter problems. By understanding the common reasons your AirPods may not be working and following the troubleshooting steps we’ve outlined, you should be able to get your AirPods back to optimal performance. And if all else fails, Apple Support is always there to help with repairs or replacements. Stay calm, follow these tips, and enjoy your AirPods hassle-free again in no time!

Share This Post: