In this article, we will show you how to get water out of charging port of phone to protect your device from potential damage and restore normal function quickly.

Accidentally dropping your phone in water or exposing it to moisture can cause some serious issues, and one of the most common problems is water in the charging port.

When your phone’s charging port gets wet, it can disrupt charging, cause electrical short circuits, and even damage your device in the long run if not addressed quickly.

But don’t panic — with a few simple steps, you can safely remove the water and protect your phone from further damage. Here’s how to get water out of your charging port and ensure your phone stays safe and functional.

See Also: 7 Steps to Clean TV Screen at Home

Why You Should Remove Water from the Charging Port

Before jumping into the “how,” it’s important to understand why getting the water out of your charging port is so crucial. Phones and charging ports are designed to be resistant to water to a certain degree (depending on the IP rating of the device). However, water can cause short circuits when it gets into the port, leading to malfunctioning charging, overheating, or even permanent damage.

So, once you notice water in your charging port, take action immediately to avoid any long-term damage.

Things You Will Need

To safely remove the water from your phone’s charging port, you’ll need the following tools and materials:

1. Soft, Lint-Free Cloth or Paper Towels
   You’ll need this to gently dry the external part of your phone and absorb any visible water. Avoid using rough cloths, as they can scratch the surface of your device.

2. Compressed Air Can
   A can of compressed air is one of the most effective ways to expel water from your charging port. Ensure that the can is held upright to avoid spraying moisture back into your phone.

3. Silica Gel Packets or Dry Rice
   Silica gel packets are a great alternative to rice and can absorb moisture effectively. If you don’t have silica gel packets, you can use rice, but it’s not as efficient.

4. Flashlight
   A flashlight is helpful for inspecting the charging port after drying. Use it to make sure no water remains inside the port.

5. Phone Case (Optional but Recommended)
   If you find that water exposure is a frequent issue, a waterproof case could be a valuable investment to protect your phone from water damage in the future.

See Also: 6 Steps to Clean Computer Monitor

Step-by-Step Guide on How to Get Water Out of Your Charging Port

Step 1: Turn Off Your Phone
The first thing you should do is power off your device. This is essential to prevent any electrical damage. Water can interfere with your phone’s electrical components, so it’s always safest to switch it off before trying to remove the moisture.

Step 2: Dry the External Area Gently
Use a soft, lint-free cloth or paper towel to gently blot the exterior of the phone, especially the charging port area. Avoid rubbing it aggressively, as you don’t want to push the water further inside the port. Just dab at the water to absorb as much as possible from the surface.

Step 3: Use a Compressed Air Can
One of the quickest ways to get water out of your charging port is by using compressed air can. Hold the can upright and aim it at the charging port from a safe distance (around 6 inches away). Use short bursts to blow the water out. Don’t try to use your mouth to blow the air, as it can introduce moisture from your breath back into the port.

Step 4: Let It Air Dry
After using compressed air can, let your phone air dry for a while. Place it on a flat surface in a dry, well-ventilated area. Avoid using a hairdryer or placing it in direct sunlight, as high heat can cause further damage to your phone. Let the device sit for at least 30 minutes to an hour before checking if the water has been completely removed.

Step 5: Use a Silica Gel Packet or Rice (Optional)
While placing your phone in rice used to be a popular method, it’s not the most effective and can be messy. Instead, use a silica gel packets (the kind that comes with shoes, bags, and electronics). Silica gel is great at absorbing moisture and can help dry out your phone. Simply place your phone in a sealed container with a few silica gel packets and leave it there for 12 to 24 hours.

Step 6: Check for Any Remaining Moisture
After you’ve allowed your phone to dry out for a few hours or overnight, take a moment to check if any moisture is still visible inside the port. You can use a flashlight to inspect the port and ensure it’s completely dry. If there’s still moisture, repeat the process or let it sit longer.

Step 7: Test Charging Your Phone
Once you’re confident that the charging port is completely dry, turn your phone back on and try plugging in the charger. If everything seems to be working as normal, you’re in the clear! If not, consider seeking professional help or checking for any residual moisture that might still be causing issues.

See Also: 6 Steps to Clean MacBook Screen Properly without damaging it

Pro Tips for Preventing Water Damage in the Future

1. Use a Waterproof Case
   If you’re prone to dropping your phone in water, consider investing in a high-quality waterproof case. It will help protect your device from moisture, even if it’s exposed to rain or submerged briefly.

2. Avoid Charging Near Water
   Be mindful when charging your phone near sources of water, like the bathroom sink or poolside. Spills and splashes are a common culprit for water damage.

3. Use a Wireless Charger
   If you’re concerned about water getting into your charging port, switching to a wireless charger can be a safer option. Since wireless charging doesn’t require a physical connection, you can reduce the risk of water-related charging issues.

When to Seek Professional Help

In some cases, water damage can cause lasting effects on your phone that you can’t resolve with these basic steps. If your phone continues to malfunction after you’ve dried the charging port, or if you’re unsure about the severity of the damage, it’s best to take your device to a professional repair technician. They can open up the device, assess any internal damage, and clean the components if necessary.

See Also: 5 Steps to fix PS5 Performance Issues

Conclusion

Getting water out of your phone’s charging port isn’t as complicated as it might seem. By acting quickly and following these simple steps, you can prevent potential damage and restore your device to working order. Just remember to power off your phone, dry the external area, use compressed air, and let it air dry before testing it again. And don’t forget — taking preventative measures in the future can help avoid these issues altogether.

Stay safe, and protect your phone from water damage!

Share This Post: